Five Technology FNF

 Forgot password?
 Register
Search
12Next
Return to list New
View: 428|Reply: 13

ifove mini 4s not loading , FVF logo not booting

[Copy link]
Post time 2018-03-18 21:00:13 | Show all posts |Read mode
I got this problem just after my tablet arrived. Is stick in a bootloop and i did  hard reset on it in order to get it functioning properly but was usless. it stops on a brand  logo screen , to strat it again the battery should finished and charging it again then is able to strat it for awhile and  gey the problem again .as I so here many has same problem bur they had old frimware not like my frimware (1.1.6C) so what i have to do?I bought it at 201812 but i couldnot use my ifive mini4s
32gb s/n:ccm10bfj010104 .pls help




Reply

Use magic Report

Post time 2018-04-04 09:54:06 | Show all posts
Hello, do you remember your previous software version? You can use the following address to download firmware and flash tool to update and repair operations. Sorry for the inconvenience caused to you

firmware:https://1drv.ms/u/s!AsL9lwe0qKlsgX-9Wlw1fEe3L-Hp
upgrade tools:https://1drv.ms/u/s!AsL9lwe0qKlsfQUVnA4XEpL7p1w
Reply Support Not support

Use magic Report

 Author| Post time 2018-05-10 06:58:56 | Show all posts
hi....i cannot see my device when pluging it to my computer not showing in device listin upgrading tools and my ifive mini 4s is black now no thing working but some time the vibration when i trun it on ,nothing more than that and in my computer too showing unknown device error code 43 usb.pls help.
Reply Support Not support

Use magic Report

Post time 2018-05-11 00:27:42 | Show all posts
This is how to get your tablet to work properly again:

1) press and hold power and + volume button ( roughly 12 seconds )
2) release both button when the big 5 shows on the screen
3) wait 5 seconds then hold the power button and the device will shut off

* Run the upgrade tool on your PC
* select the firmware 1.0.8w from your download folder
* plug USB cable into your PC ONLY ( do not connect to the tablet )
* press and hold the ( - ) volume button
* Plug the USB cable into the tablet and release the ( - ) volume button
* your tablet will show up in the screen in the upgrade tool
* Select UPGRADE on the top middle
* press START and wait
* when firmware tool shows you success unplug the USB cable, press STOP and your device will boot and go into the update process it will take a few minutes so be patient.
* Once it finishes booting up shut it off
Reply Support Not support

Use magic Report

 Author| Post time 2018-05-11 04:08:36 | Show all posts
flatblack replied at 2018-05-11 00:27
This is how to get your tablet to work properly again:

1) press and hold power and + volume button  ...

thanks..i did as you said but with frimware 1.1.7c because i got this from FNF .at any way every thing you said i did it but now is showing only 5 FNF logo .so can you send to me that frimware you talked about.in my mini4s  had 1.1.6c .so what do you thing?
Reply Support Not support

Use magic Report

Post time 2018-05-11 07:08:30 | Show all posts
Just use the 1.1.7c. Be sure to follow the instructions the 5 fnf logo will be on the screen for a long time. 1St time I upgraded, I thought it was FUBAR, but the logo goes away after a few minutes.
Reply Support Not support

Use magic Report

 Author| Post time 2018-05-11 19:26:10 | Show all posts
flatblack replied at 2018-05-11 07:08
Just use the 1.1.7c. Be sure to follow the instructions the 5 fnf logo will be on the screen for a l ...

i did it but is showing only the 5 fnf logo .any ideas.pls.
Reply Support Not support

Use magic Report

Post time 2018-05-12 00:04:00 | Show all posts
falah replied at 2018-05-11 04:26
i did it but is showing only the 5 fnf logo .any ideas.pls.

Just keep it plugged in let it run. Patience is key here. I just updated my wife's 4s. It took 15 min to get off the logo screen to the home screen.
Reply Support Not support

Use magic Report

 Author| Post time 2018-05-12 04:16:02 | Show all posts
flatblack replied at 2018-05-12 00:04
Just keep it plugged in let it run. Patience is key here. I just updated my wife's 4s. It took 15  ...

ok i will test this time too.
Reply Support Not support

Use magic Report

 Author| Post time 2018-05-13 04:56:48 | Show all posts
falah replied at 2018-05-12 04:16
ok i will test this time too.

hii...i did it but is still have same problem ,I kept it plugged after the upgrade tool showed the upgrade is success my tablet restart three times but was unable to boot and getting the logo FNF,and when i turn off for many houres and turn it on iam getting this message look at pic.
Reply Support Not support

Use magic Report

12Next
Return to list New
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|©2017 Five Technology Co., Ltd. All rights reserved. ( 粤ICP备12002035号

2018-06-25 15:55 GMT+8 , Processed in 1.269673 second(s), 20 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list